RACE DASH AIM MXL PISTA NEW (R1 R6 CBR GSXR DUCATI CAR

AIM MXL PISTA

(1 speed, 8 analog inputs, AMP connectors)



SPECIFICATIONS
• Dimensions: 174*110 mm
• Display dimensions 140*67 mm
• External 9 -24 V power supply
• From 128 kb to 16 MB non-volatile internal memory.





FEATURES
•Water resistant, extra-wide display with backlight
•Rugged and lightweight aluminium chassis
•RPM graphical and numerical view
•Configurable RPM scaling (from 4.000 to 20.000rpm end of scale)
•Gear number: calculated or sampled from "on-board" sensor
•CAN protocol for external "expansion modules"
•10 shift lights: Green - Yellow - Red
•6 freely configurable max/min alarm lights
•Lap times - configurable Split times, through infrared RX TX
•Internal data acquisition system with 8 MB non volatile memory
•Up to 2 kHz sampling (200 Hz for single channel)
•Total and partial (resettable) odometer
•Can do track mapping using internal lateral g-sensor or our powerful GPS module.





TECHNICAL CHARACTERISTICS


8 analog inputs (Temperatures, Pressures, Potentiometers, Lambda probe, Gyroscope, "on-board" sensors)
Tot. max sampling frequency 2000 samples per second
6 fully configurable alarm leds
10 fully configurable shift lights
8 Mb internal memory
1 RPM input
1 speed input
Gear number
Internal lateral G sensor
CAN/RS232 protocol for ECU interface
USB data download
Connectors: 2 AMP + 2 Binder





To sum up...........

If you’re a driver, aiming to your best lap, you will find in the MXL Pista a valuable help to analyse and optimise both your and your vehicle’s performances. Featuring 8 Megabytes of internal memory, 8 configurable channels, kit’s sensors and infrared transmitters and receivers, MXL Pista is what you are searching for.

MXL is a powerful, professional and high-tech gauge which allows the user to sample and display a large number of parameters. MXL includes a tachometer, 1 RPM input, 8 to 12 analog inputs (temperatures, pressures, potentiometers, accelerometers, gyros, lambdas, "on-board" and custom sensors), 1 to 4 speed input, gear and lap time.

With a beautiful and wide display, MXL has got a backlight and a high speed USB data download to a PC: these data may be analysed with the powerful Race Studio 2 software. It can be a part of a network of AIM products such as (see through) GPS module, lambda controllers LCU-ONE or DaVid video system.

It can be easily connected through CAN or RS232 to an existing ECU to enable a huge amount of extra channels.